CDGS Marine Transformer

Item No.: 03011
Marine three phase transformer core is heart type structure, with high quality cold rolling steel sheet pile into the system, the windings can be firmly fixed, and the seismic performance is strong. Coil is enameled wire winding and become.
Description
Description
CDGS Marine Transformer

This series of transformer can be used in the ship, Marine and other places of lighting, electricity, communications and power grid.

The normal working conditions and installation conditions

1. Height is not more than 2000 meters above sea level

2. The temperature of the air around:

Not more than + 40 degrees

24 hours on average value not more than +35

Lower limit of no less than -5 degrees

3. Air relative humidity is not greater than 90%

4. Environment air, does not contain a corrosive action on metals, and damage the insulation gas or dust

5. In use, to prevent the bump and vibration, to prevent the erosion of water, rain, snow

6. The power supply voltage waveform similar to sine wave

7. The swing Angle: 22.5 ° or less

8. Angle: 15 ° or less


CSD Marine Transformer Technical Specifications

Spec Capacity (kVA) Primary rated voltage(V) Voltage combination Link set label Overall dimensions Installation dimensions
50Hz 60Hz 50Hz 60Hz A B C C1 C2
CDGS-5 5 400 450 400 230 115 400 230 115 Yy0 Yy11 Dd0 550 330 580 260 190
CDGS-10 10 620 510 630 330 190
CDGS-16 16 700 450 680 330 310
CDGS-20 20 700 450 680 380 315
CDGS-25 25 750 450 690 380 315
CDGS-30 30 750 450 690 380 315
CDGS-40 40 800 450 715 565 315
CDGS-50 50 850 500 780 540 390
CDGS-63 63 900 500 870 540 390
CDGS-80 80 950 550 920 550 435
CDGS-100 100 1050 600 970 550 490
Send your message to us
ver_code